[VHFcontesting] Cushcraft 13B2 Match

[Jerry]

  What you could try.. is Hy-Gains 'Beta-match' as they call it for the 
214.. fairly similar in size to the CC.. may take a bit of experimenting 
to get the proper match for you.. unless you can find someone who had a 
13B2 take a fall..and only have the CC Matching stuff you need..?  Good 
Luck..
Hy-Gain 214 Manual at link below;
http://www.hy-gain.com/man/pdf/VB-214FM.pdf
Jerry VE6CPP
DN39or

On 9/27/2010 12:58 PM, Mike Benonis wrote:
> I've looked at the manual, but all it does it tell me to install the UltraMatch box.  What I need to do is build a replacement matching network for it, and the manual does not have a schematic for it unfortunately.
>
> Mike KI4RIX
>
>
> On 27 Sep 2010, at 11:05 , stanley thimm wrote:
>
>> Go to the MFJ/Cushcraft site and download the manual pdf.
>>
>> 73, Stan VA3ST
>>
>>
>> On Sat, Sep 25, 2010 at 12:28 PM, Mike Benonis<mailinglists at benonis.net>  wrote:
>>> Does anyone have experience building a custom match for the Cushcraft 13B2 antenna?  I recently got one, but it was missing all hardware and the match (basically, it came with boom and elements only, including the DE with the T-match pieces parts).  I feel like it should not be hard to build the match but I don't know what the balanced feedpoint impedance is supposed to be.
>>>
>>> Thanks and 73 de Mike KI4RIX
>>>
>>>
>>>
>>> Best regards,
>>>
>>> Mike Benonis
>>> mike at benonis.net
>>> KI4RIX
>>>
>>> _______________________________________________
>>> VHFcontesting mailing list
>>> VHFcontesting at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>