[VHFcontesting] KU4AB 6m Loop vs. PAR Moxon

[Andrew Glasbrenner]

AJ4LU and I used one for several run and gun rover ops, covering 20+ grids at 70 MPH. We even turned it in motion with no issues other than mounting it backwards the first time!

73, Drew KO4MA

Sent from my iPad

> On Oct 29, 2014, at 8:59 PM, Jarred Jackson <jarred.jackson at hotmail.com> wrote:
> 
> I have a 3 element yagi for 6m, but it seems a bit too much for me to take out on the rover for contests. So in May I ordered a 6m loop from KU4AB using the website. After months of waiting, a phone call, and several emails, I gave up and consider my $87 lost. But this provided the opportunity to look into other antennas and came across the PAR Moxon. The company was very responsive and the antenna performs nearly as well as my yagi. Its a bit bigger than the loop might have been, but it fits just fine on the rover mast and has some gain. I have not yet experienced 60mph highway speeds. If anyone has any experience with the PAR 6m Moxon in a rover application I would like to know if it holds up or if I should take the wire and side "sticks" off while traveling. 
> 
> Jarred - KF2MR
>                         
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting