[VHFcontesting] N1MM Frequency override?

[William Stearns]

You normally just type in the frequency in the call textbox and press
enter.  Should update the freq in the log.

Bill NE4RD DN55

On Sat, Sep 13, 2014 at 9:25 AM, Barry Pfeil <barrypfeil at gmail.com> wrote:

> I'd like to use my N1MM logger for today's ARRL VHF contest.  Problem is
> that I have it interfaced only to my Elecraft K3 for 6 meters but I use
> other rigs for 2M and 70cm.  Is there a way to override the band data from
> the keyboard on a QSO-by-QSO basis in N1MM?  When I tell N1MM to switch up
> a band (CTRL-Up) it momentarily shows 144 then switches immediately back to
> 50 because the radio (K3) can't change.
>
> Failing to find a way to override the frequency info, I guess I could just
> shut down the radio interface.  Maybe I just answered my own question....
>
> Any suggestions?
>
> Thanks and 73,
> Barry K6RM FM03
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>