[VHFcontesting] HTX10 mod for transverter
aa9il at sbcglobal.net
aa9il at sbcglobal.net
Fri Apr 29 23:55:47 EDT 2016
Im in the same boat with my HTX-10 - so I used an omron relay to recombine the TX/RX and have this keyed with the +8v out of the HTX (if that mod was done for keying voltage) - minor inconvenience and when I decide to use the IF to feed a different configuration (split) - its ready.
73 MikeAA9IL
On Friday, April 29, 2016 10:35 PM, Lloyd - N9LB <lloydberg at charter.net> wrote:
Hello Dan!
Since your previous transverter has separate RX and TX, why don't you just
modify the new transverter for split RX and TX IF? That system is probably
easier to interface and you don't run the risk of blasting the RX path with
TX power. The transverter probably just has a relay that switches the
shared IF connection back and forth between the RX and TX paths. Put
connectors directly on the RX IF and TX IF points beyond that IF relay (
making sure to get the TX level correct of course ).
73
Lloyd - N9LB
-----Original Message-----
From: VHFcontesting [mailto:vhfcontesting-bounces at contesting.com] On Behalf
Of Dan Evans
Sent: Friday, April 29, 2016 9:27 PM
To: 'VHF Contesting Reflector' <vhfcontesting at contesting.com>
Subject: [VHFcontesting] HTX10 mod for transverter
Hello group,
I have a bit of a problem. I have an HTX10 that I modified for transverter
use quite awhile ago. The transverter I was using at the time used a split
TX and RX line. Now, I just bought a transverter that uses a common TX/RX
line...
So, I need to re-combine the TX/RX line. You can find the mod I used here:
http://pages.cs.wisc.edu/~timc/e/htx-10.html
I'm pretty good with a soldering iron and basic electronics, but I'm not an
RF engineer. Would anyone care to tell me what I need to do to fix this?
I'm assuming it will take more than just rerouting the tx line to the common
connector...
Thanks helping me dispel a bit of my ignorance :-)
73
Dan
--
K9ZF
Secretary, Clark County Amateur Radio Club, Amateur Radio Emergency Service,
Clark County Indiana.
EM78el
The once and future K9ZF /R no budget Rover ***QRP-l #1269 Check out the
Rover Resource Page at:
<http://www.qsl.net/n9rla>
List Administrator for: InHam+grid-loc+ham-books Ask me how to join the
Indiana Ham Mailing list!
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
VHFcontesting mailing list
VHFcontesting at contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting at contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
More information about the VHFcontesting
mailing list