[VHFcontesting] Yaesu 736R question

mikflathead at aol.com mikflathead at aol.com
Fri Mar 3 19:43:24 EST 2017

 Correct, but the diode matrix determines the frequencies the radio will operate, at least according to the manual. Mike



-----Original Message-----
From: Donald M. Ross <N12614 at aol.com>
To: mikflathead <mikflathead at aol.com>; 'vhfcontesting at contesting.com' <VHFcontesting at contesting.com>
Sent: Fri, Mar 3, 2017 7:39 pm
Subject: RE: [VHFcontesting] Yaesu 736R question

Because those are the European 2m and 70cm bands?

-----Original Message-----
From: VHFcontesting [mailto:vhfcontesting-bounces at contesting.com] On Behalf
Of mike repinski via VHFcontesting
Sent: Friday, 3 March, 2017 18:36
To: vhfcontesting at contesting.com
Subject: [VHFcontesting] Yaesu 736R question

I am trying to fix a 736. The CPU board was replaced. The board was
purchased off Ebay. The board came from Europe. The radio will cover 144-146
and 430-440. The diodes are correct on the 2 meter and 430 boards. I am not
sure why it is only covering these frequencies? Any insight. Thanks Mike
VHFcontesting mailing list
VHFcontesting at contesting.com

More information about the VHFcontesting mailing list