[VHFcontesting] Rohn 55 top plate or beacon plate...

[Marshall-K5QE]

Hello everyone....I find that I need a Rohn 55 top plate or beacon plate 
to complete an antenna project that we are working on.  If you have one 
that you are not using, please let me know and we can work out a sale / 
trade.

Just to be sure that we are all on the same page, a top plate has a 
central (large) hole for the mast and 4 holes that match the TB3 or TB4 
thrust bearing.  A beacon plate does not have a central hole, it has 4 
bolt holes(about 1/2" in diameter) to allow the mounting of a beacon 
light on the top of the tower. It takes some serious machining to 
convert a beacon plate to a top plate, but we have done several here 
over the years.

If anyone can help, please reply via email or call me at 409-787-3830.  
If I am not at home, please leave a message....thanks.

73 Marshall K5QE
Phone 409-787-3830 at the home shack