[VHFcontesting] Elecraft transverter question

[Chet S]

Mike,

FWIW, the schematic for mine shows no variable cap and the Elecraft booklet
says "The oscillator in XV222 is not adjustable, the firmware in an Elecraft
K2 or
K3 transceiver allows you to compensate for frequency errors using the menu
commands."

73,
Chet N8RA


-----Original Message-----
From: VHFcontesting <vhfcontesting-bounces at contesting.com> On Behalf Of mike
repinski via VHFcontesting
Sent: Saturday, December 7, 2019 10:26 AM
To: vhfcontesting at contesting.com
Subject: [VHFcontesting] Elecraft transverter question

I have a Elecraft 222 mhz transverter that I am going to interface with my
TS-940 Kenwood. The frequency of the transverter is off about 8 kc. when
used with my K2 radio. Looking at the schematics for the 6 meter transverter
they have a variable cap to net the frequency. Is there any reason not to do
this for the 222 transverter? Any suggestions? Thanks Mike, See you on 222.
_______________________________________________
VHFcontesting mailing list
VHFcontesting at contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting