[VHFcontesting] Older DEMI 10 gig xvrtr power output

[Sean Waite]

Turns out I can't read. The display read  .1mW, not 1mW. 20dB up from 0.1mW
is the expected 10mW. Whoops!

Sean

On Sat, Jun 29, 2019, 16:16 Sean Waite <waisean at gmail.com> wrote:

> Hi all,
>
> I have an older DEMI 10368-144. It isn't marked LP, but lacks the heat
> sinking I'd expect on the 1W models. I had assumed it was the low power
> model, but I measured 1mW through a 20dB attenuator. The LP model is rated
> at >10mW but 100mW is much much greater. Were the older models 100mW, or am
> I doing something wrong here?
>
> Thanks and 73,
> Sean WA1TE
>

On Sat, Jun 29, 2019, 16:16 Sean Waite <waisean at gmail.com> wrote:

> Hi all,
>
> I have an older DEMI 10368-144. It isn't marked LP, but lacks the heat
> sinking I'd expect on the 1W models. I had assumed it was the low power
> model, but I measured 1mW through a 20dB attenuator. The LP model is rated
> at >10mW but 100mW is much much greater. Were the older models 100mW, or am
> I doing something wrong here?
>
> Thanks and 73,
> Sean WA1TE
>