[VHFcontesting] M2 5WL 2 meters

Ethan Miller K8GU ethan at k8gu.com
Tue Jun 8 13:03:45 EDT 2021


hi all,

It's imperative that you call Joel to ask about the connector rather
than just look at the web site if you need something specific.  He
does stock (sometimes in small quantities) a lot of things that are
not on the web site, which is sort of a "guide" to what he carries
that satisfies most ham needs.

73,

--Ethan, K8GU (who has spent many thousands of dollars at The RF
Connection for work and hobby).

On 6/8/21, Terry Price <terry at directivesystems.com> wrote:
> If it is a 3/8 fine thread he will have it, I use these on our 2m and 6m
> antennas and I get them from him.
>
> Terry
>
> On Tue, Jun 8, 2021, 10:23 AM Bill Olson <callbill at hotmail.com> wrote:
>
>> Joel doesn't have this connector in his catalog, but he will probably
>> know
>> about it. I have seen these and think I even had some at one point.. I am
>> checking the "junque" (good luck with that!!)
>>
>> bill
>>
>> ________________________________
>> From: VHFcontesting <vhfcontesting-bounces+callbill=
>> hotmail.com at contesting.com> on behalf of Ray Golley <rgolley at comcast.net>
>> Sent: Tuesday, June 8, 2021 9:01 AM
>> To: Herb Krumich <wa2fgk at yahoo.com>; Herb Krumich via VHFcontesting <
>> vhfcontesting at contesting.com>
>> Subject: Re: [VHFcontesting] M2 5WL 2 meters
>>
>> Herb
>> Check with Joel at The RF Connection.
>> Call 301.840.5477 or Email rfc at therfc.com
>>
>> de
>> N3RG Ray
>>
>>
>>
>>
>> > On 06/07/2021 10:11 PM Herb Krumich via VHFcontesting <
>> vhfcontesting at contesting.com> wrote:
>> >
>> >
>> > I'm trying to do a repair of a long yagi for 2 metersI think it's a
>> 5WLThe center pin on the Female N is badI checked with M2 and to replace
>> the the DE is 75$ plus shippingUnGODlyI took the small aluminum box
>> apart,
>> took out tons of goop, and got the N connector unscrewed.Other than M2,
>> does anyone know where I can get a connector replacement ?For sure this
>> is
>> not a normal NThe threaded part that screws into the aluminum block is
>> about 3/8 inch fine threadThank you guys.Will give out some points Sunday
>> afternoonHave funHerb K2LNSCall always used on VHF is WA2FGK
>> > _______________________________________________
>> > VHFcontesting mailing list
>> > VHFcontesting at contesting.com
>> >
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fvhfcontesting&data=04%7C01%7C%7Cef8762ca91e344880d4d08d92a5c06f0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637587397014905816%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5AQ6ixYkI8AaR5LeX13aaSHWnVDso63pYyqa%2B4%2Btsxg%3D&reserved=0
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting at contesting.com
>>
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fvhfcontesting&data=04%7C01%7C%7Cef8762ca91e344880d4d08d92a5c06f0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637587397014905816%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5AQ6ixYkI8AaR5LeX13aaSHWnVDso63pYyqa%2B4%2Btsxg%3D&reserved=0
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting at contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting at contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>


-- 
http://www.k8gu.com/
Repair.  Re-use.  Re-purpose.  Recycle.


More information about the VHFcontesting mailing list