[VHFcontesting] FT100D plastic foot replacement

[Rick R]

TNX all for your helpful suggestions. If the foot kit is still available from Yaesu USA in CA, I'll get it. TNX to W9KXI for the research, it's the same feet for the FT450. If they are not available, I'll get something 3-D printed or perhaps use some ready-made rubber feet that can also screw right in as the screws and base of the one that broke are still with me. TNX es 73, Rick K1DS
________________________________
From: Rick R <rick1ds at hotmail.com>
Sent: Tuesday, May 6, 2025 12:17 PM
To: vhf contesting <vhfcontesting at contesting.com>; NEWS Reflector <newsvhf at mailman.qth.net>; packrats reflector <packrats at mailman.qth.net>
Subject: FT100D plastic foot replacement

My Yaesu FT100D has a broken and missing hinged plastic foot that props up the front. Any source to get a replacement or another fix? The other foot is OK. Perhaps someone has an idea as both feet have a screw into the bottom of the rig. I use the rig in so many portable activities and would like to preserve that. Thanks
Rick K1DS