pk-232 problems

[Bob Foster]

Hi Bob,

To get your PK-232 to connect to WriteLog, try this:

In your files, go to the Windows directory, locate the file
writelog.ini, open it, then look at the ports section.  On the port that
you are going to use for the PK-232, make sure all the communications
values are correct, then go to the last thing on the line, which is: 
,x
Erase the x (but not the comma), save the file, then see if WriteLog
will connect to it.

Let me know if this works!

73, Bob, K3QIA