[WriteLog] Networks

[Larry Benko]

Ditto for me.  I also was concerned as I have a 100baseT twisted
pair network in my house.  I put up a 20m dipole in the basement,
parallel to and about 6 ft. away from the Cat5 cable.  Measured
a huge file transfer (600MB).  Then transmitted into the dipole
with 100w and again did the same file transfer.  Exact same times.
And yes I flushed the disk caches in order for the tests to be
fair.  So I would say use good quality cable for the network and
don't worry.

73,
Larry Benko, W0QE

"C.M. Christensen" wrote:
> 
> Hi Barry -- I have been using the RJ45 twisted pair with a D-Link
> DFE-904 hub (10/100) for over a year and no problems at all running a
> KW, or with any computer noise into the rigs.
> --
> 73, Chris ACØM
> 
> Barry Kutner wrote:
> 
> > For a change, here's a question not dealing with a problem:
> >
> > Currently my 2 computer network uses RG58 and BNC connectors
> > (10Base2) to connect the Ethernet cards. Thinking of switching to
> > RJ45/twisted pair cabling with a hub and I wonder if anyone has
> > had any RF problems (either network noise in the radio or RFI into
> > the network)?
> >
> > Tnx/Barry
> > --
> > Barry Kutner, W2UP              Internet: w2up@mindspring.com
> > Newtown, PA         FRC         alternate: barry@w2up.wells.com
> >
> > --
> > WWW:                      http://www.contesting.com/writelog
> > Submissions:              writelog@contesting.com
> > Administrative requests:  writelog-REQUEST@contesting.com
> > Problems:                 owner-writelog@contesting.com
> 
> --
> WWW:                      http://www.contesting.com/writelog
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com

--
WWW:                      http://www.contesting.com/writelog
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com