[WriteLog] re: WriteLog Digest V3 #103

[dphillips@shra.org]

Unavailable until 4/21/00 - If urgent contact David Levin at dlevin@shra.org

______________________________________
Dana Phillips
General Counsel
Sacramento Housing & Redevelopment Agency
dphillips@shra.org
---------- Original Text ----------

From: "WriteLog Digest" <owner-writelog-digest@contesting.com>, on 4/17/2000
8:31 AM:


WriteLog Digest        Saturday, April 15 2000        Volume 03 : Number 103



In this issue:

    Re: [WriteLog] CW Decoder Help?-Solved
    [WriteLog] Scope display
    RE: [WriteLog] CW Decoder Help?

See the end of the digest for information about 3830-digest

----------------------------------------------------------------------

Date: Sat, 15 Apr 2000 09:16:57 EDT
From: SavageBR@aol.com
Subject: Re: [WriteLog] CW Decoder Help?-Solved

Hi Phil
Bingo. You hit the problem right on. My program was set up for "Replay" 
changing to "Record" solved the problem.

Many thanks,
Bruce

------------------------------

Date: Sat, 15 Apr 2000 17:33:36 -0400
From: "Richard B Drake" <rbdrake@erols.com>
Subject: [WriteLog] Scope display

Suddenly the Scope display in my WriteLog tuning window is not
working. It was working a few days ago, I don't recall doing
anything that should affect it but now it just sits there with a
small dot in the middle. The remainder of the tuning window works
normally. Any suggestions?

- ----
73, Rich Drake - W3ZJ
w3zj@arrl.net

------------------------------

Date: Sat, 15 Apr 2000 23:20:11 -0000
From: "W. Wright, W5XD" <w5xd@writelog.com>
Subject: RE: [WriteLog] CW Decoder Help?

I strongly recommend you download the latest upgrade,
10.16, from http://www.writelog.com/Downloads.
It comes with a new little program you'll find as
programs\WlogSbControl.exe.
Run that guy to make sure WL knows exactly how to
deal with your sound board. 

Wayne

> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of SavageBR@aol.com
> Sent: Friday, April 14, 2000 19:54
> To: writelog@contesting.com
> Subject: [WriteLog] CW Decoder Help?
> 
> 
> 
> Ref: Writelog Ver 11.13
> I recently upgraded from Win 95 to Win 98. Now I cannot get 
> the CW decoder to 
> function. I am using the LINE input to the computer and can 
> hear the CW audio 
> in the notebook speakers as before the upgrade.
> The decoder window has no indication of a signal or of noise. 
> And there is no 
> indication of any characters or letters in the Decoded area. 
> In other words 
> the Scope area and the message area are blank. Apparently 
> there is no input 
> to the decoder. 
> 
> Suggestions anyone??
> Thanks
> Bruce
> 
> --
> WWW:                      http://www.contesting.com/writelog
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
> 
> 

------------------------------

End of WriteLog Digest V3 #103
******************************


--
WWW:                      http://www.contesting.com/writelog
Submissions:              writelog@contesting.com
Administrative requests:  writelog-digest-REQUEST@contesting.com
Problems:                 owner-writelog-digest@contesting.com


--
WWW:                      http://www.contesting.com/writelog
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com