[WriteLog] SO2R CW Question

[BOB (AK6R)]

I have used it both ways - with one LPT and the A/B to switch a relay which
changes the PTT and S CW from the Writelog LPT1 port.  However with the
Icoms, I can do the radio control via a CT-17 (pins 2,3 and ground) and use
pin 4 for PTT and pin 20 for CW all in one - five wire cable - one for each
radio.  Since the Icoms give out the band data I don't need to fool with the
LPT1 pins for these so cabling is very easy.  I have the PTT lines going to
a "Y" interface into the mic input with the other "OR" input being the Heil
PTT switch I use in SSB.

Seems pretty easy for me and avoids using Com1,Com2 LPT1 and LPT2 for the
same function.  I have to use COM1 and Com2 anyway for the Icoms so why not
piggy back on the ports with the other functions?

My choise - There are lots of ways to make Writelog work with SO2R.

P.S. - Just got DXtelnet interfaced via internet and cable modem - who is
that neat!  Have it feeding both DX4WIN and Writelog - now about that second
monitor.......

Bob, AK6R

----- Original Message -----
From: Jim Stevens <k4ma@mindspring.com>
To: BOB (AK6R) <callbob@home.com>
Sent: Thursday, November 23, 2000 5:05 PM
Subject: Re: [WriteLog] SO2R CW Question


> Bob,
>
> That assumes that you have the cabling to handle the switching via RTS.
> I don't because I have the much simpler approach of using 2 LPT ports.
> The point being that Writelog such support both.
>
> 73,
> Jim Stevens, K4MA
> k4ma@mindspring.com
> ----- Original Message -----
> From: "BOB (AK6R)" <callbob@home.com>
> To: "Jim Stevens" <k4ma@mindspring.com>
> Sent: Friday, November 24, 2000 3:27 PM
> Subject: Re: [WriteLog] SO2R CW Question
>
>
> > I have no problem running SO2R with Writelog and using the comm lines
for
> cw
> > for each radio (RTS).  Also have the internal keyers as secondary.  My
> > radio's are Icom's 775's.
> >
> > Bob, AK6R
> >
> > ----- Original Message -----
> > From: Jim Stevens <k4ma@mindspring.com>
> > To: <writelog@contesting.com>
> > Sent: Thursday, November 23, 2000 9:31 AM
> > Subject: Fw: [WriteLog] SO2R CW Question
> >
> >
> > >
> > > Thanks to everyone that responded.  Due to this limitation in
Writelog,
> I
> > > will be using brand T contest software this weekend.  Good luck to
> > everyone.
> > >
> > > BTW, no one commented on my serial number problem in SS SSB.  Is there
> > > a way to edit my serial number in the Writelog log?
> > >
> > > 73,
> > > Jim Stevens, K4MA
> > > k4ma@mindspring.com
> > > ----- Original Message -----
> > > From: "Jim Stevens" <k4ma@mindspring.com>
> > > To: <writelog@contesting.com>
> > > Sent: Wednesday, November 22, 2000 11:27 AM
> > > Subject: [WriteLog] SO2R CW Question
> > >
> > >
> > > >
> > > > Writelog seems to only allow one LPT port for sending CW.
> > > > Is this true? Or can I define LPT1 for radio 1 CW and LPT2 for radio
2
> > CW?
> > > > If true, I assume that the switching between 2 radios for CW is done
> > > > external
> > > > to the PC.  What is the common method for doing this switching?
> > > >
> > > > 73,
> > > > Jim Stevens, K4MA
> > > > k4ma@mindspring.com
> > > >
> > > >
> > > > --
> > > > WWW:                      http://www.writelog.com/
> > > > Submissions:              writelog@contesting.com
> > > > Administrative requests:  writelog-REQUEST@contesting.com
> > > > Problems:                 owner-writelog@contesting.com
> > > >
> > >
> > >
> > > --
> > > WWW:                      http://www.writelog.com/
> > > Submissions:              writelog@contesting.com
> > > Administrative requests:  writelog-REQUEST@contesting.com
> > > Problems:                 owner-writelog@contesting.com
> > >
> >
>
>


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com