[WriteLog] Update 10.27G (and MMTTY support in RttyRite!)

[FireBrick]

I consistently did just this very type of thing using RttyRite and RITTY.
I fed the audio from the rig to two computers with identical sound cards.
Ran RITTY on one and WL Rittyrite on the other.
RITTY won on most signals, especially flutter.

I've now run standalone MMulty and RITTY using the same setup.
Just about the same, On one signal Multy wins, on another signal RITTY wins.
both beat RttyRite most of the time, again especially on the multipath or
signals with QSB.


----- Original Message -----
From: "Jim McDonald" <n7us@arrl.net>
To: <writelog@contesting.com>
Sent: Sunday, July 29, 2001 6:42 PM
Subject: Re: [WriteLog] Update 10.27G (and MMTTY support in RttyRite!)


>
> And how are both compared to a HAL P-38 or DXP-38?
>
> Jim N7US
>
> ----- Original Message -----
> From: "Barry " <w2up@mindspring.com>
> To: <writelog@contesting.com>
> Sent: Sunday, July 29, 2001 4:27 PM
> Subject: Re: [WriteLog] Update 10.27G (and MMTTY support in RttyRite!)
>
>
>
> Has anyone compared Writelog's RTTY to MMTTY side by side on
> the tough (flutter) signals?
> Barry
>
> On 29 Jul 01, Jon Harder wrote:
>
> >
> > Great to see this, and thanks for giving us the update,  Ron.
> >
> > > In 10.27G Jorgen SM6SRW has added MMTTY support. MMTTY is
> > > working in this update, however we do have a few that MMTTY
> > > isn't working quiet properly. For most it is working. We are
> > > working on it as fast as possible..
> > >
> >
> > Having read Scott's and Don's posts on this combo in Beta test,  I've
been
> > eager for more info as an avid user of both programs.   I do realize
that
> > the last two hours of this weekend's Russian test probably aren't the
best
> > time to ask,  but sometime very soon would one of the testers have a
> moment
> > to share just enough info for the rest of us to give it a try?
> >
> > Main question from my end:
> >
> > Does this implementation work on one PC like it did with WF1B, selecting
> KAM
> > in TU Type dialog, then using a second Comm Port and null-modem
crossover?
> >
> > If not, how to select plug-in TNCs on the dialog?  ( ala RITTY? )
> >
> > Very 73,
> >
> > Jon     K1US
> >
> >
> > ----- Original Message -----
> > From: "Ron K5DJ" <k5dj@writelog.com>
> > To: <writelog@contesting.com>
> > Sent: Sunday, July 29, 2001 15:26 PM
> > Subject: [WriteLog] Update 10.27G
> >
> >
> > >
> >
> >
> >
> > --
> > WWW:                      http://www.writelog.com/
> > Submissions:              writelog@contesting.com
> > Administrative requests:  writelog-REQUEST@contesting.com
> > Problems:                 owner-writelog@contesting.com
> >
>
>
> --
> Barry Kutner, W2UP              Internet: w2up@mindspring.com
> Newtown, PA                     Frankford Radio Club
>
>
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
>
>
>
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
>
>


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com