[WriteLog] Two-radio switching problems

[W. Wright, W5XD]

WriteLog puts the 2-radio A/B signal on the same LPT port as
for the DVK signal. And when the W9XT card is the DVK, there
is no A/B output from WL at all. 

Clearly this is something I should look into. The only
suggestion I have for getting an A/B output in current
versions of WL is to not use the W9XT card and use a 
sound board instead.

Wayne

> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of TOMK5RC@aol.com
> Sent: Tuesday, June 26, 2001 23:52
> To: writelog@contesting.com
> Cc: GeorgeK5KG@aol.com
> Subject: [WriteLog] Two-radio switching problems
> 
> 
> 
> First, if this message makes it to the reflector, it will be 
> after a month of trying to figure out how to send plain text 
> mail over AOL (version 6 is HTML). If you are reading this 
> and you are an AOL subscriber, it was sent from the AOL web 
> site, not the usual AOL screens. Thisis the only solution AOL 
> tech support had for this problem.
> 
> I have been using NA for years and just went "Windows." I 
> have two FT1000MP's and a home-brew audio and keyer switching 
> system built from the NA manual. I have that switchbox hooked 
> to LPT1 and a W9XT voice keyer in LPT 2. There does not seem 
> to be any such option in the menu of Writelog. Any suggestions?
> 
> Tom, K5RC
> 
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
> 

--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com