[WriteLog] Trouble With Byterunner PI-400 Card and Paccket

[WA9ALS - John]

I just have to remind that I've posted several times to this list about
Byterunner having ADMITTED problems with their PCI card "on some
systems" and recommended against it if at all possible.  If you check
out the most obvious things and it still doesn't work, give Byterunner a
call.  After about 10 minutes, the tech admitted there were problems and
told me to send it back for a refund.  Mine was the 8-port PCI card and
my experience was about a year ago.  GL

----- Original Message -----
From: "Ed" <k4sb@akorn.net>
To: "Eric Rosenberg" <wd3q@erols.com>; <writelog@contesting.com>
Sent: Monday, March 12, 2001 12:05 PM
Subject: Re: [WriteLog] Trouble With Byterunner PI-400 Card and Paccket


>
>
>
> Eric Rosenberg wrote:
> >
> > I have a Byterunner PCI-400 4-port PCI serial card that I
successfully
> > used in my old P1/166.
> >
> > I can't get it to work on my P3/550 machine, where the card provides
> > com 3-4-5-6...
>
> Well, one error and one solution come to mind. IRQ6 is dedicated to
> the floppy drive controller and will not work if one is installed.
>
> Solution is to disable the floppys in BIOS and then you should be able
> to use the card.
>
> I also wonder about that card even using IRQ6. Have you checked to see
> if perhaps that port will work when using IRQ9. Thinking of a misprint
> here.
>
> 73
> Ed
>
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
>


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com