[WriteLog] W5XD/K5DJ Multi-Keyer stops
Dick Dievendorff
dieven@msn.com
Tue, 6 Nov 2001 07:02:34 -0800
I didn't think I was flaming anyone. I'm not upset or trying to upset other
people, I'm trying to understand why my hardware/software doesn't work as I
expected it to. I'm troubleshooting, and I'm asking for help. Since it's a
manufactured product, I may have to send it back for repair or replacement.
I need to do that in a reasonable amount of time if I expect any help from
the manufacturer.
I understand that with a single radio you must choose Left or Right. I
chose Left. It didn't work. When I chose Right things work fine. I don't
understand why Left didn't work. The problem could be that the Multi-Keyer
with Writelog never works for anyone as a single radio connected as the Left
rig. I really hope that's the case, and it's something that will eventually
be changed in a future Writelog software version. I looked for e-mail that
had that sort of problem and eventually found some that hinted at this. Or
the problem could be that it's supposed to work in single-radio mode as
either Left or Right. If that's the case, then maybe my MultiKeyer won't
work as a 2-radio multikeyer. I know other people have had success with
their multikeyers in SO2R setups. I believe that most multikeyers work
fine. I'm worried only about mine, not all of them.
My question then becomes do most people succeed in single radio mode with
Radio Left? And if it's widely known that you must always hook up a single
radio as radio right, shouldn't that information be widely known? I looked
for this sort of information through the help screens and web pages about
the Multi-Keyer and didn't find any mention of "single radio, use radio
right". Therefore I conclude that this constraint is perhaps only on MY
multikeyer (and perhaps only with Writelog 10.28C), and maybe it'll show up
when I try to use Radio Left for something useful.
I just bought the keyer. If it's defective, the time to get it repaired or
replaced is soon thereafter. If I wait for a year to try the two-rig setup,
it'll surely be out of warranty.
Thanks,
Dick, K6KR
----- Original Message -----
From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
To: "Dick Dievendorff" <dieven@msn.com>
Sent: Sunday, November 04, 2001 6:25 PM
Subject: Re: [WriteLog] W5XD/K5DJ Multi-Keyer stops
> SO2R does work - many people using it.
>
> Soesn't seem too hard. With one radio, it uses one of either the right or
> left (don't know which) YOU apparently want it to use two. But that
would
> make it even more confusing.
>
> With two rdios, one is on R and one is on L.
>
> And think of e-mail ettiquette.
>
> ----- Original Message -----
> From: "Dick Dievendorff" <dieven@msn.com>
> To: "Steve Baron - KB3MM" <SteveBaron@starlinx.com>
> Cc: <Writelog@contesting.com>; <k5dj@contesting.com>
> Sent: Sunday, November 04, 2001 21:20
> Subject: Re: [WriteLog] W5XD/K5DJ Multi-Keyer stops
>
>
> > But I'm worried that if/when I eventually go to two-radio contesting
that
> > the thing won't key both rigs. So I have to figure this out very soon.
> > Maybe it's the software. Maybe the firmware in the box is broken. I
just
> > don't know.
> >
> > Dick, K6KR
> >
> >
> > ----- Original Message -----
> > From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
> > To: "Dick Dievendorff" <dieven@msn.com>
> > Sent: Sunday, November 04, 2001 8:13 AM
> > Subject: Re: [WriteLog] W5XD/K5DJ Multi-Keyer stops
> >
> >
> > > Seems a reasonable way to do it.
> > >
> > > ----- Original Message -----
> > > From: "Dick Dievendorff" <dieven@msn.com>
> > > To: <Writelog@contesting.com>; <k5dj@writelog.com>
> > > Cc: <wanals@starband.net>
> > > Sent: Sunday, November 04, 2001 07:43
> > > Subject: Re: [WriteLog] W5XD/K5DJ Multi-Keyer stops
> > >
> > >
> > > > Well I found that my Multi-Keyer works in single-radio mode as long
as
> I
> > > > hook up the rig as the Right radio. Maybe something's wrong with
the
> > > > software; maybe something's wrong with the left part of my
> Multi-Keyer.
> > > But
> > > > I seem to be going OK on the Right rig.
> > > >
> > > > Dick, K6KR
> > > >
> > > > ----- Original Message -----
> > > > From: "WA9ALS - John" <wa9als@starband.net>
> > > > To: "Dick Dievendorff" <dieven@msn.com>
> > > > Sent: Saturday, November 03, 2001 4:15 PM
> > > > Subject: Re: [WriteLog] W5XD/K5DJ Multi-Keyer stops
> > > >
> > > >
> > > > > Please post your successes and failures as this goes on Dick - I
> have
> > > one
> > > > on
> > > > > order that I thought would arrive today, but I guess it's going to
> be
> > > > Monday
> > > > > now. Please work out all the bugs so you can tell me! HI HI Tnx
> > > > > ----- Original Message -----
> > > > > From: "Dick Dievendorff" <dieven@msn.com>
> > > > > To: "Dick Dievendorff" <dieven@msn.com>; <Writelog@contesting.com>
> > > > > Sent: Saturday, November 03, 2001 7:05 PM
> > > > > Subject: Re: [WriteLog] W5XD/K5DJ Multi-Keyer stops
> > > > >
> > > > >
> > > > > Well, part of the problem is solved. I plugged in the little
remote
> > > > > potentiometer and I can now adjust the speed very conveniently.
> > > > >
> > > > > The remaining problem is that pressing the ESC key to stop sending
> > stops
> > > > the
> > > > > W5XD multikeyer and it won't send again (from the program or the
> > paddle)
> > > > > until I cycle the power on the multikeyer.
> > > > >
> > > > > Dick
> > > > >
> > > > > ----- Original Message -----
> > > > > From: Dick Dievendorff
> > > > > To: Writelog@contesting.com
> > > > > Sent: Saturday, November 03, 2001 3:52 PM
> > > > > Subject: [WriteLog] W5XD/K5DJ Multi-Keyer stops
> > > > >
> > > > >
> > > > > I'm trying to use a W5XD/K5DJ multikeyer for the first time with
> > > > WriteLog
> > > > > 10.28C. It't not working very well for me.
> > > > >
> > > > > I'm using Windows XP and a serial port to the Multi-Keyer and on
> to
> > my
> > > > > ICOM rig control. The rig control seems to work fine, whether the
> > > > > MultiKeyer is on or off. So far so good.
> > > > >
> > > > > I can use the paddle to key the rig. I can press F11 and my CQ
> > > message
> > > > > gets sent. But if I press the ESC key to stop sending, or press
> > ALT-F10
> > > > to
> > > > > speed up the CQ (it's way too slow), the Multi-Keyer stops sending
> and
> > > > won't
> > > > > send again when I press F11 or any other function key, and the
> paddle
> > > > stops
> > > > > working. If I turn off power to the Multi-Keyer and turn it back
on
> > > > again,
> > > > > I can send CW again until I press ESC or try to adjust the speed.
> > > > >
> > > > > The speed is very slow, around 10-12 WPM. I'd like to send
about
> > > 28-32
> > > > > WPM. But I can't adjust the speed with Alt-F10 without having the
> > keyer
> > > > go
> > > > > comatose.
> > > > >
> > > > > This is the first time I've connected the Multi-Keyer up.
> > > > >
> > > > > Is this a known problem with the Multi-Keyer, or have I fallen
> into
> > a
> > > > > common user error, or do I need to send this particular
Multi-Keyer
> > back
> > > > for
> > > > > replacement or repair?
> > > > >
> > > > > Any help would be appreciated. I'm piddling around in SS but
would
> > > like
> > > > to
> > > > > use the program for CQ WW. I bought the Multi-Keyer solely
because
> I
> > > > wanted
> > > > > to use Windows 2000/XP and wanted to use a robust keying solution.
> > The
> > > > one
> > > > > I've got now isn't working at all.
> > > > >
> > > > >
> > > > >
> > > > > 73 de Dick, K6KR
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > WriteLog mailing list
> > > > WriteLog@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/writelog
> > > >
> > > >
> > > >
> > >
> > >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
> >
>
>