[WriteLog] Can't open sound board??

[Don Hill AA5AU]

Jim et al,

I've run into this problem (I think).

1. Reboot your computer.
2. Start WL and Rttyrite.
3. If you get the "cannot open sound card" message, click OK.
4. In Rttyrite, select 'dumb terminal' as the TU.
5. Close Rttyrite.
6. Restart Rttyrite.
7. Select whatever TU you want to use, if it's MMTTY or whatever.

If this does not work, set the TU to dumb terminal unit, then shut
down WL and reboot.  After rebooting, start WL and Rttyrite and
change the TU from dumb terminal to whatever you want.

Once you do this, you won't have to do it again (if it works).

73, Don AA5AU


----- Original Message ----- 
From: "Jim McDonald" <n7us@arrl.net>
To: <writelog@contesting.com>
Sent: Saturday, November 24, 2001 9:54 PM
Subject: [WriteLog] Can't open sound board??


> After reading the review in QST, I bought and am trying to get a RIGblaster
> Plus to function.  I can receive RTTY fine in MMTTY, but when starting WL, I
> get the error message that the sound board can't be opened for receive.
> 
> It used to receive in WinRtty as well as the MMTTY plug-in.
> 
> Any suggestions would be appreciated.
> 
> 73,
> Jim N7US
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog