[WriteLog] FT-1000MP and fsk
T&R
tashland@nethtc.net
Sat, 21 Dec 2002 15:45:53 -0600
Hi Jim,
I am using the rtty jack in the back for fsk. I have the mode set to RTTY
on the front and the RTTY and LSB leds are lit. I changed the jumper on the
P38 board to open collector and have polarity set at normal on both the
board and FT1KMP. The ALC with full output is just within the normal range,
but when I try to reduce the power down to 50 watts, the alc climbs.
According to the manual, you are supposed to be able to control the alc with
the mic control.
I have a rigblaster in the shack and may try that instead. The only thing
is I don't think I can use my narrow filters in lsb.
Thanks for the help!
73,
Terry, WK0F
----- Original Message -----
From: "Jim McDonald" <jim@n7us.net>
To: "T&R" <tashland@nethtc.net>; <writelog@contesting.com>
Sent: Saturday, December 21, 2002 2:33 PM
Subject: Re: [WriteLog] FT-1000MP and fsk
> Terry,
>
> You are using FSK not AFSK, which uses the PACKET connector. Thus the MIC
> control has no effect. Press the RTTY mode button on the MP and check the
> MP manual for FSK (not AFSK) operation.
>
> Jim N7US
>
> ----- Original Message -----
> From: "T&R" <tashland@nethtc.net>
> To: <writelog@contesting.com>
> Sent: Saturday, December 21, 2002 12:56 PM
> Subject: [WriteLog] FT-1000MP and fsk
>
>
> I know this is in the middle of a contest, but I need help with my 1000MP.
> I am using the fsk jack in the back with my Hal P38 rtty modem. My alc is
> beyond the normal range. The manual says to use the mic gain to control
the
> alc setting and then adjust the PO. The mic gain seems to have no
function.
> I am in the rtty (lsb) mode. I have made some contacts in the contest
> today, but I don't want to damage the modem or the rig.
> Thanks and 73,
> Terry, WK0F
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog