[WriteLog] red x next to serial number

[Emmerson Bigguns]

Rob,
Make note of the frequency and mode of the contact, chances are the program
sees it as an invalid QSO.

I ran into this with the ARRL 10M contest, some of the band markers were off
and the QSO was seen by WL as out of band for that mode. i.e.: SSB on
10.010. Changing the mode or freq. fixed the QSO, then do a recalculate to
clear it up.

72, oo
Dan, N8IE
FPqrp #-6, QRP-l #1404, FISTS #4985

-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of K6RB
Sent: Saturday, December 28, 2002 5:48 PM
To: writelog@contesting.com
Subject: [WriteLog] red x next to serial number


Just finished the RAC Winter contest and noticed that my number 8 QSO had a
little red "x" next to the serial number and was not being counted. What's
up? I manually inserted that QSO in the Cabrillo file, later, and
recalculated the score, manually, but try as I might, nothing I did would
make the program accept that QSO. I'm baffled.

Rob K6RB

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.434 / Virus Database: 243 - Release Date: 12/25/2002

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.434 / Virus Database: 243 - Release Date: 12/25/2002