[WriteLog] KAM

[Rick Tyler]

This is from the Kantronics web site . . . FAQ department . . . I haven't
actually tried it, but here's what they say:
------de Rick, WQ8Q

---------------
Q: I can't get a command prompt from my TNC. All I get is some funny
characters that look like two little L's followed by S00, then another
little L.

A: Your TNC has been left in Host Mode. This usually occurs after running a
host mode software program such as KaGOLD or KaWIN. To exit the Host Mode
and return to the command prompt, use a standard terminal program such as
Pacterm or Procomm Plus.

Use the following three steps to exit Host Mode:

Hold down the ALT key on your keyboard and type the number 192 on the keypad
(not the keys above the keyboard). Release the ALT key.
Type the letter Q.
Hold down the ALT key on your keyboard and type the number 192 on the
keypad. Release the ALT key.


----- Original Message -----
From: "Steve Moore KB9JD" <smoore@abcs.com>
To: "John L Merrill" <jmerrill1@adelphia.net>
Cc: <writelog@contesting.com>
Sent: Sunday, February 10, 2002 6:11 AM
Subject: Re: [WriteLog] KAM


> John
>
> My KAM wants to stay in host mode and its a pain to get it back to
terminal
> mode. I would be curious to what your comparison was. If you find an easy
way to
> get it back to terminal mode let me know.
>
> 73's
>
> Steve KB9JD
>
>
>
> John L Merrill wrote:
>
> > I've been using MMTTY for awhile but I decided to go back to my old KAM
just
> > for a comparison. When one exists frome writelog, does not the program
> > supposed to take the KAM out of Host mode/RTTY and revert it back to
> > terminal/command mode?
> >
> > John N1JM
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>