[WriteLog] Which sound board??

Jerry Pixton jpixton@shentel.net
Mon, 08 Jul 2002 19:33:20 +0000


Sante,

My computer also has the integrated AC97 chip but the AO40Rcv telemetry 
program would not decode without CRC errors on the AC97 chip. What I did 
was to get two identical Creative 16 PCI cards to add in. I ended up with 
two cards of the same model because I could never get the single 16 
PCI  and the PCI128 to install in the proper order and I could not get 
Writelog to accept AFSK played thru the 2nd card - it would switch the Line 
In but not the Line Out and there did not seem to be any Index Override 
command on the Line Out side.

So I have

Creative SB AudioPCI
Creative SB AudioPCI (2)
SoundMAX Digital Audio

I can use sound card Index 0 for the WinRTTY windows (rtty, psk31 or cw) 
from the FT1000mp Main on Left and Sub on Right
But now I can use the second card Index 1 for a second MMTTY plug in 
window. Or I use it sometimes to run AO40Rcv telemetry program.
The third card (on the mother board) I use to play music, etc. I plan to 
use it to play back wave files from contest but I haven't gotten to that stage

In looking back at my notes I disabled the AC97, then installed each of the 
other cards and then reinstalled the drivers for the AC97. Everything has 
been running smoothly. I had several messages on the Writelog list server 
back in November 2001 about this problem.

Writelog seems to do fine with whatever you can get installed as Sound card 
at Index 0 but does not seem to do so well at Index 1. But does seem to be 
able to do the record/playback thing ok there. So install your add-in card 
as Index 0 and then reinstall the AC97 at Index 1 (if you only need two)

The Creative Sound Blaster 16PCI card seems to be working out for everyone.

Jerry, W6IHG

At 08:30 PM 7/8/2002 +0200, Sante - IK0HBN wrote:
>Hi WL users!
>At last with a MOXA SMARTIO C168H/PCI I resolved my lack of IRQ's.
>Now I am looking for a second sound board so to have the chance of 
>recording and playing at same time if needed an entire contest. I'd like 
>also having that running with 2 RTTY windows so to have more chance to 
>understand the split of a DX station using the sub-receiver of FT1kMP, or 
>copying weak station using 2 different RTTY program.
>
>At moment I have an old SOUND BLASTER LIVE VALUE which runs ok, but it is 
>sold out now. On my mainboard there is a sound chip (AC97) but I do not 
>know if it's possible having it as a second sound board. How to tell WL 
>which sound board has to use?
>
>All Creative Sound Blaster are quite easy to find here if I know the 
>model. I do not need sound fidelity as this computer runs only for radio 
>stuffs.
>I stay tuned for all your suggestions.
>Thankfully
>Sante
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------