[WriteLog] Signal recording

[Sante - IK0HBN]

Thank you John.
I had been able to export the .WAV file and burn a CD for hearing via a 
normal CD reader. What it was only 3,4 Mb in WAV format (1 hour of 
recording ) became long the whole CD (60 minutes). While doing that, I do 
notice that some very distorted sounds had been saved: my own manipulation.

I used Monitor function on my Ft1000Mp, but sound is not understandable. I 
mean that some load with RF on Sound Board has involved.
Has anyone got involved in a similar problem? The cure?
Thank you
Sante




At 13.42 14/07/2002 -0400, you wrote:
>At 18:37 +0200 07/14/2002, Sante - IK0HBN wrote:
>>I discovered after the event that the saved sound was only which of the 
>>calling stations. My CW answers and CQing had not been saved. Sure my fault.
>
>Don't know what radio you're using. On my FT1000MP I take the audio from 
>the AF OUT jack in the back, where the CW sidetone does not appear. If I 
>want to record my signal, I must press the MONI button, so I hear my 
>actual signal in QSK. Then I hear my signal in the recording.
>
>Hope this helps.
>
>73,
>--
>   _
>  /~\ The ASCII        | J o h n   B a s t i n           K 8 A J S
>  \ / Ribbon Campaign  | jbastin@sssnet.com         K8AJS@arrl.net
>   X  Against HTML     |          http://www.qsl.net/k8ajs
>  / \ Email!           |
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog