[WriteLog] Rigblaster

[WA9ALS - John]

Dave you could've saved yourself a lot of headaches by getting a transistor
and a couple of resistors from RS instead of using the Rigblaster.  I think
it's only really meant for AFSK, isn't it?  With the FSK/AFSK setting,
WriteLog will be sending 5-bit Baudot code on the TxD line of the COM port -
this is intended for the RTTY (FSK) input on your rig, and I doubt
Rigblaster has any role here.

I think with the RigBlaster you will be running AFSK only, and you should
have Rttyrite set for soundboard AFSK.  Rigblaster passes the AFSK audio on
to your rig via the mic connector.  Good luck - 73

----- Original Message -----
From: "Denis Campbell" <aa0yx1@attbi.com>
To: "WriteLog" <writelog@contesting.com>
Sent: Tuesday, June 04, 2002 4:56 PM
Subject: [WriteLog] Rigblaster


>
> I'm trying to get  a rigblaster Nomic working with WriteLog on my laptop
for
> field day without much success.  I've been through the port settings and
> also set the mode in Rtty Rite for sound card FSK/AFSK.   No joy!  Anyone
> had any success and if so what's the secret?
>
> Denis
> AA0YX
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>