[WriteLog] PK-900

[Don Hill AA5AU]

I'd like to know this too so I can put the info up on the Web.  I think it
does but the problem is that you must communicate to the PK-900 at something
different than the PK-232?  I communicate to my PK-232 at 9600 baud.  I think
the PK-900 needs a faster baud rate but I'm not sure.  I used to know this.

You need to make sure you have the correct baud rate set in the writelog.ini file
for the COM port you are using.  This is done under the Configuration settings.
If someone is using the PK-900 please post what baud rate you are using and what
your COM port settings are in your writelog.ini file and I will post this information
on the Web for future reference.

Thanks,
Don AA5AU

----- Original Message ----- 
From: "Jim" <jimsharp@attbi.com>
To: "WriteLog" <WriteLog@contesting.com>
Sent: Friday, October 04, 2002 5:36 PM
Subject: [WriteLog] PK-900


Does any one know if WriteLog supports the PK-900?
I've been unable to get it to work using the "PK-232" selection.
Any ideas?

Jim - W5AP

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog