[WriteLog] Com Ports 5-7

[Darack, Zev]

This is an excerpt from the writelog help.  Add this to your ini file and
you will be able to use those ports for CW and rig control.

73, Zev N2WKS

WRITELOG.INI [Ports]
[Ports]
There are 4 "slots" available for WriteLog rig interfacing. By default,
CommSlot1 is COM1:, but you can change that by changing the number on the
right of the equal sign. These settings are not used for RTTY or for packet

CommSlot1=1
CommSlot2=2

In this example, the third and fourth slots are on COM7 and COM8. COM15 is
as high as is supported.
CommSlot3=7
CommSlot4=8

 

-----Original Message-----
From: David C. Wales
To: writelog@contesting.com
Sent: 10/14/02 10:35 PM
Subject: [WriteLog] Com Ports 5-7

Hello,
     Why are ports 5-7 available for rotor control but not for rig
control or cw?  I am presently using a Comtrol USB/Serial Hub to add
these ports.  Are there plans to add them or am I missing something.
Thanks.
     Dave NG6X
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog



CONFIDENTIALITY NOTICE:  This communication and any attachments are
confidential, and are only for the use of the intended recipient.  If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited.  If you have received this
communication in error, please contact the sender immediately and
delete the original message.  Thank you.