[WriteLog] Writelog & Rigblaster Questions

[Les Peters]

After searching the Writelog archives a little further I finally located the
correspondence from WA0SXV, Mike is really good!  How he figured this out I
don't know.

Connect Serial cable between com port and Rigblaster, no null modem cable
needed.  In the pull down "setup" select "ports" and configure the following;

   * Check "CW" button on the com port
   * Select "pc generates" under "CW keyer type"
   * Select "Windows sound card' under "CW keyer type"
   * Access "CW PTT..." and select "On LPT pin 16/COMM RTS"

Works like a champ!

Les, N1SV

Dave LaBat wrote:

> I would like to reconfigure my station with the rigblsater so I would be
> very interested in this info also!
> 73, Dave KØXH
>
> Les Peters wrote:
>
> >Is there anyone using Writelog to control a Rigblaster via a serial port
> >(not rig control).  I configured this last year but apparently I didn't
> >take any notes and my memory has failed me now that I have upgraded my
> >pc.
> >
> >What pin of the serial port is Writelog toggling when I activate a .wav
> >file?  Does there need to be a null modem cable between the serial port
> >and Rigblaster box?  Are there any changes to the .ini file that need to
> >be made for this to work?  Is there any restrictions as to which serial
> >port you can use?
> >
> >I'm hoping somebody was smarter then me and either wrote this down or
> >has a better memory then me.
> >
> >Les Peters, N1SV
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---