[WriteLog] M/2 Cabrillo File Help

[Darack, Zev]

According to the rules for CQWW M/2:

Two Transmitter (M2): A maximum of two transmitted signals at
any time on different bands. Both transmitters may work any and all
stations. A station may only be worked once per band regardless of
which transmitter is used. Each of the two transmitters used must keep
a separate chronological log for the entire contest period, or if
elec-tronic
logging is used, the electronic log submittal (Cabrillo) must indi-cate
which transmitter made each QSO. Each transmitter may make a
maximum of 8 band changes in any clock hour (00 through 59 min-utes).

How do you indicate which transmitter made each QSO?  I see two fields that
could be used to do this but neither of them seem to have recorded the
information correctly.

According the help files the colomn 'r' should indicate which radio is which
but since we used to computers and only one radio on each computer this
column always says 1.

There is a column 'm' that I can't find documentation on in the help files.
It appeared to be linked to the "This Radio is Run" = 0 and "This Radio is
Mult" = 1.  I also verified that this column appears in the cabrillo file
with that data.

There are some cases where the value is incorrect but the network id is
correct.  Is there any way to assign all contacts from Radio A a 1 and all
contacts from radio B a 0?

73,
Zev N2WKS



CONFIDENTIALITY NOTICE:  This communication and any attachments are
confidential, and are only for the use of the intended recipient.  If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited.  If you have received this
communication in error, please contact the sender immediately and
delete the original message.  Thank you.