[WriteLog] OQP module

[John E Bastin, K8AJS]

At 13:39 -0700 08_24_2003, Steve Woodruff wrote:
>
>As for the station setup info being saved across
>logfile opens, that is behavior that my newer
>modules have but some of my first modules do not
>have that.  If i had all the time in the world I
>would update the older modules to write that info
>to the logfile so it should be retrieved when the
>log is opened.... but i haven't found the time
>yet and it won't matter once BPL takes over.  :)

BPL???

>
>Remember, OHQP and my many other modules are not
>supported by Ron or Wayne so asking for help about
>them on this mailing list is not always going to
>work.

I was under the impression, apparently an incorrect one, that saving 
configuration info was something done in the program and not directly 
controlled by the individual module, so I posted my comments on the 
list.


>  Besides, you're lucky I saw this posting
>with all of the posts about soundcards and virus
>crap which has been flooding this list.  If you
>really need help with my modules, email me directly.

I will do that in the future. You're right, the signal-to-noise ratio 
on the list can sometimes make finding useful information a challenge.

73,
-- 
   _
  /~\ The ASCII        | J o h n   B a s t i n           K 8 A J S
  \ / Ribbon Campaign  | jbastin at sssnet.com         K8AJS at arrl.net
   X  Against HTML     |       http://www.qsl.net/k8ajs
  / \ Email!           |