[WriteLog] Dual Monitor with PCI
gbaron
gbaron@charter.net
Wed, 1 Jan 2003 14:24:42 -0600
You can use any 2 graphics cards (best if they are the same but not needed)
if you are running XP, which has the dual monitor support as part of the OS.
I know this does not buy you an AGP port but at least it may help if you
have a spare card.
I am using the G450 and it is really nice even with the problems that come
up , such as the fact that the WriteLog windows don't remember where they
were if they are on the second monitor. IT is really nice to move the BAND
Map to monitor 2.
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Jeff Maass
> Sent: Wednesday, January 01, 2003 2:04 PM
> To: writelog@contesting.com
> Subject: [WriteLog] Dual Monitor with PCI
>
>
>
> A while ago, I purchased Matrox G450 AGP boards for use with
> Writelog with two monitors.
>
> Unfortunately, the two used computers I purchased don't have
> AGP slots, and so I need to switch to a graphics interface
> board in PCI format.
>
> I know that the Matrox G450 is available as a PCI board, but are
> there other proven solutions as well with dual interfaces?
>
> If anyone wants to trade my G450 AGP for your G450 PCI with
> dual VGA interfaces, let me know!
>
> 73,
> Jeff Maass jmaass@columbus.rr.com Located near Columbus Ohio
> USPSA # L-1192 NROI/CRO Amateur Radio K8ND
> Maass' IPSC Resources: http://home.columbus.rr.com/jmaass/index.html
> Circleville USPSA/IPSC: http://home.columbus.rr.com/jmaass/pcsiipsc.htm
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>