[WriteLog] Two soundcards

Donald Eriksen don.wsixffh@verizon.net
Tue, 7 Jan 2003 11:08:08 -0800


Indeed it is, Walter, I've been doing that for a couple of years. You do
need an available ISA slot on your computer for a SoundBlaster SB16 sound
card for RITTY. The other sound system for MMTTY can be a plug-in PCI card,
or a built-in sound system on the mother board if it passes the sound test.
My setup is as follows:

Home built computer using a purchased motherboard with 1.0 gHz P3 Processor,
which has (1) 16 -bit ISA slot and (4) 32 - bit PCI slots.
It has a built in AC'97 Digital Audio controller.

I had no problem getting RITTY working with the SB-16 sound card. There is a
settable Device ID in  MMTTY that  you will have to try until you find one
that doesn't conflict with the SB-16. It's under : Option/Setup
MMTTY/Misc/Device ID. Mine is set to -1 and it works.

I am available anytime if you want to contact me direct for any more details

73, Don W6FFH
don.wsixffh@verizon.net

----- Original Message -----
From: "walter giovannini" <wgiovan@adinet.com.uy>
To: <WriteLog@contesting.com>
Sent: Tuesday, January 07, 2003 9:35 AM
Subject: [WriteLog] Two soundcards


> Hello ,is possible to run in one computer under win98se with two souncard
> MMTTY at the same of RITTY 4.5.
> cx7bf walter giovannini.
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog