[WriteLog] two soundcard audio control

[Jerry Pixton]

Walter,

You will have to tell MMTTY which sound card to use.

In the stand alone version, go to Options, Setup MMTTY and then choose the 
MISC tab. There you can set the Device ID. 0 is you first card, 1 is the 
second one. You can also select which channel, left or right, your audio is on.

In the plug-in version, this is Options, Setup.

Good luck

Jerry, W6IHG



At 02:21 AM 1/16/2003 -0300, walter giovannini wrote:
>Hello i put two soundcards in my machine with the help of many hams and work
>fine.
>sb-16 with k6sti and the second a pci Crystal SounFusion.
>In the sb-16 k6sti take control of the audio input and no prob.
>In the another soundcard run MMTTY but i lost the input control and show
>overflow.
>Only with a little gain in the loudspeaker the message is out. I think this
>prob.
>i solve with your help.
>walter giovannini cx7bf
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------