[WriteLog] RE: Yaesu Mark V Frequency VFO B

[Jerry Pixton]

Bill,

Try this. Open  a Writelog log. Go to Setup, Display Format..., click in 
the box labeled Transmit Frequency. Now log a qso using VFO B and see what 
is recorded. On the FT1000mp at least (don't know about the Mark V version) 
the TRANSMIT frequency is recorded from VFO B. The only thing neither the 
radio nor writelog can know is that your intention was to receive on VFO B.
Since the Split status is also on what gets recorded is VFO A for receive - 
as it should for SPLIT

Does this happen with the Mark V? What else do you want to do with your radio??

Jerry, W6IHG



At 08:17 AM 1/22/2003 -0800, Bill Heather wrote:
>HI all,
>
>I ran some test here and the only frequency recorded was VFO A. What would
>be nice is to utilized the full potentual of the radio by incorporating
>control of both VFOs. This would allow us for those that don't have a second
>rig to at least be able to run like we have a 2 rigs. If beta testers are
>need put me down on the list I'll be happy to help.
>
>73
>Bill Heather, KB6WKT
>
>_______________________________________________
>WriteLog mailing list
>WriteLog at contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton at shentel.net
------------------------------------------