[WriteLog] Newbie question

[Greg Fischer]

Hi all.

I just downloaded, registered and installed Writelog.  Will be using it with
a TT Orion once that rig support is completed, but in the mean time, I want
to be able to at least use WL to key the rig.

The rig is on COM 5 via USB-Serial adapter.

On Com 2, I have a Donner's interface which is connected to the rig's PTT.

Com  1 has rotor control.

Problem is I cannot get it to key the rig.  I went into Port setup and chose
Com 2 for CW and checked the PTT CW send via RTS.  Also selected to send CW
via PC GENERATES.

Under CW PTT, I chose send via COM RTS.

It is keying the rig, but not sending any CW.  When I   open the cw
keyboard, and type test, the rig keys like it is long enough to send TEST
and then unkeys.  But no CW.

I know I must have something simple set up incorrectly, but can't find it.

OP system is Win 98SE


Thanks for the help.

Greg
AB7R