[WriteLog] QSO rate not following band

[Kurszewski Chad-WCK005]

If you are referring to the Packet Spots window:
Let the operator determine whether or not there is a
need to look at only spots on one band.  Do not remove
features based on contest selection.  Why would there be an
option left to "follow me"?  That is essentially a single
band selection (which didn't work either).

If you are referring to the Rate Window:
When operating a contest where more than one 
transmitter/band is allowed (even if only one TX signal
allowed at one time), it is important to know what the
"run" station rate is, by itself and without counting the
QSOs that the 2nd "mult" radio is making, so that a determination
of whether or not the rate is falling enough to warrant moving
to a different band can be made.

Chad WE9V

> -----Original Message-----
> From: Richard Zalewski [mailto:w7zr at citlink.net] 
> Sent: Monday, November 03, 2003 3:41 PM
> To: Kurszewski Chad-WCK005; writelog at contesting.com
> Subject: Re: [WriteLog] QSO rate not following band
> 
> 
> If you are referring to ARRL SS it may be because there is 
> not a single band category and no need to only look at spots 
> on one band or track Qs and rate by band.
> 
> Dick W7ZR
> 
> ----- Original Message ----- 
> From: "Kurszewski Chad-WCK005" <Chad.Kurszewski at motorola.com>
> To: <writelog at contesting.com>
> Sent: Monday, November 03, 2003 2:00 PM
> Subject: [WriteLog] QSO rate not following band
> 
> 
> > Using 10.42C, I also noticed that the "Single band"
> > setting for the Rate window was not working.  It included
> > all QSOs, not just by band.
> >
> > I also noticed that the Packet Spots window band filtering didn't 
> > work.  Also, the band selector (10, 15, etc) was missing 
> from the drop 
> > down list.
> >
> > Chad WE9V
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com 
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> >
> 
>