[WriteLog] Band Map problem

[Eric Scace K3NA]

Double-click on the call in the bandmap will take your rig there.

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com]On Behalf Of Roger Huntley
Sent: 2003 November 4 Tuesday 19:14
To: writelog at contesting.com
Subject: [WriteLog] Band Map problem


While connected to packet I get the spots in the packet terminal and packet
spots windows. I can click on the call in the packet spot window and the rig
will go to that frequency and it will also put the call in the band map
window and the QSO entry window.  However clicking on a call in the band map
window does not take the rig to that frequency.

My question is should the spots appear in the band map window in addition to
the packet spot window and should you be able to click on a spot in the band
map window and have the rig go to that frequency?

I realize it is probably a setting set wrong but I can not find it.  Any
suggestions would be appreciated.

Thanks,
Roger, W7VV
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/