[WriteLog] Rig communication

[John Shaw]

Jim,

I'm no guru on these matters but you might like to read the replies to
my message (All mode PTT) and that the bottom option in the CWPTT Setup
box is in fact what you are looking for, and will give you the control
sig on the com port rts that you want.

Hope this helps.

73,

John ZL1BZY.

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of James A. Carmody
Sent: Sunday, 19 October 2003 6:16 p.m.
To: writeloggroup
Cc: James A Carmody
Subject: [WriteLog] Rig communication

Sorry for this, but I have a really dumb question.  I
have a new FT 857 which communicates well with
software such as the 817 Commander via the CAT cable
which plugs into the serial port of my notebook.

I am trying to get DVK operation going with .WAV files
on the notebook and WriteLog.  I am getting the
feeling that such will only work if connection is made
via my printer LPT port and the radio---not the CAT
cable.  If it will not work on the CAT, I am not going
to fool with it in the near term (CQWWSSB).

Feedback?  Sorry if this is too stupid to be worth a
comment.

Jim, ei2vno

=====
James A. Carmody, nn5o, carmody at lawyer.com
6363 Woodway, Suite 910
Houston, TX 77057
http://www.lawyers.com/jacarmodypc
Voice Mail: 713 446 4234; eFax: 815 461 5321
GO TEXANS!!
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/