[WriteLog] Can't Intialize PK-232MBX

[KØBX]

David, there are many things that could cause this problem but here is 
on of the solutions.

PK-232 INTERFACING
A PK-232 may be used for CW keying.  See the documentation of that device
for information on connecting the PK-232 to your computer.  If WriteLog 
will
not communicate with your PK-232, it may be necessary to do the
editing described below.
Using NotePad edit C:\Windows\writelog.ini  as follows:
In the file, go to the section labeled [Ports].
Look at the line for the Com port you intend to use.  It will look like 
this:
COM1:=9600,n,8,1,x
Check to be sure all parameters are correct, then Delete the final x 
(but not
the comma).  It should look like this:
COM1:=9600,n,8,1,
Click on File, Save.  Then open WriteLog; this should allow
your PK-232 to communicate with WriteLog.

There is more help on setting up the PK-232 on my webpage at:

http://www.qsl.net/k0bx

Good Luck
Joe K0BX