[WriteLog] W5XD Mulikeyer INI file commands

[Eric Scace K3NA]

   When in doubt, check the WriteLog Manual first.  I found this on the page discussing INI [Configuration] settings:

"For the W5XD multi+ keyer only.

"CwAutoLtrSpace=YES		Turns on auto letter space
"CwSidetonePaddles=YES		Turns on CW sidetone for paddle-sent CW
"CwSidetoneMachineSent=YES	Turns on CW sidetone for machine-sent CW
"CwSidetoneCyclesOn=2	number of ½ milliseconds of sidetone ON

"CwSidetoneCyclesOff=2
"UseCDnotDSR=YES	If your COMM port supports CD instead of DSR

    You will have to add the lines you want to the INI file; e.g., add in the [Configuration] section a line that says
"CwAutoLtrSpace=YES".

73,
   -- Eric K3NA


-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com]On Behalf Of Bob Henderson
Sent: 2003 September 14 Sunday 01:13
To: Writelog at contesting.com
Subject: [WriteLog] W5XD Mulikeyer INI file commands


Hi gang

I understand there is an INI file command to set the Multi-keyer to auto
character space when using the paddle input.  I can't for the life of me
find evidence of this in my INI file.

Could some kind fellow tell me where I can find this, or if I need to insert
it myself then the format of the command line?

BTW I still haven't resolved the problem of delayed PTT assertion by the
Multi-keyer when I use paddle input!

73

Bob, 5B4AGN, P3F


_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/