[WriteLog] LPT ports

[DougN1 at aol.com]

I have recently acquired a newer computer running XP professional. The only 
problem with it is that LPT1 is broken.
I have installed a PCI card with 2 serial and 1 parallel port. The parallel 
port configures as LPT 3 (or LPT 2) Device Manager is warning not to try to 
configure as LPT 1. (It thinks LPT 1 is ok and working properly)

In SETUP>PORTS in the Antenna Relay column, CW, DVK & Antenna Relay are 
grayed out on LPT 2 & 3.
Then in the Antenna Relay Source Frequency box, only selection of Relay on 
LPT 1 is available. LPT 2 & 3 are again greyed out.

Is there a way to get Writelog to recognize LPT 2 and/or LPT 3? I need this 
to drive my TopTen Band Decoder.

Thanks for any assistance.

Doug...K6HGF