[WriteLog] RTTY Tuning with the FT1000D

[Aldewey at aol.com]

Thanks to all of you that responded to my question on using the 500 and 250 
hz filters with the FT1000D on RTTy using AFSK.

Several of you mention that I should run the SHIFT control at about 9:00 to 
move the RTTY tones back into the passband.  At first that didn't work but then 
I noticed I had the WIDTH control turned all the way counter-clockwise.  Once 
I turned that back to normal, the filters worked great (with the SHIFT around 
9:00)  and I am now able to print consistently with the filters in.

I also changed from WINRTTY to MMTTY which really seemed to help too.

Thanks again for all your help.  This reflector is great.

73,

AL, K0AD