[WriteLog] Re: Trouble with COM2

[Jerry Flanders]

I run 2s1p PCI NetMOS i/o cards assigned to com3 and 4 fine with WL using 
those ports- no problems of any kind. I recently had some DMA+IRQ conflicts 
(not WL-related) I had to work myself through and found the combination of 
the {My Computer - Control panel - System - Device manager - [device type] 
- [specific device] - resources} and the {start - Programs - Accessories - 
System Tools - System Information - Hardware Resources - [specific device] 
- [advanced information]} VERY helpful. Those tools helped me find 
conflicts and resolve them.

I have never run across a WL i/o problem yet that was actually caused by 
WL. YMMV.

Jerry W4UK

At 18:40 1/7/04, John Griswold wrote:
>A few days ago I wrote about problems I was having with WriteLog and COM2 
>talking to my radio. I won't go through a blow-by-blow (email me if you 
>want that), but it boils down to me using one of the add-on ports as COM2. 
>It seems that certain programs, WriteLog apparently in that group, don't 
>like COM1, COM2, COM3, and COM4 being mapped in from a PCI bus card.
>
><SNIP>
>73,
>John / KB1HDO