[WriteLog] NAQP multiplier list

[W. Wright, W5XD]

10.44 introduced the feature where the multiplier window remembers its
on-screen position when you exit. Unfortunately, it remembers it even
if it was an icon when you exit, so when you restart it can be off screen.

The position is in writelog.ini, 
[MULTIPLIERS]
X=nnn
Y=mmm

Delete the X/Y above and it will come up on screen.

Alternatively, you can fix it from the screen (and this applies to
most windows--not just WL--that are off-screen because, say, you
lowered your video resolution):

click on the icon for the window with the RIGHT mouse button
and a menu will come up. NOW TAKE YOUR HAND OFF THE MOUSE.
press the UP cursor key to select the "Move" menu entry,
and now press the ENTER key. The four cursor keys UP/DOWN/LEFT/RIGHT
will "drive" the window around the screen. You'll see its edge.
Press ENTER when its on screen.

WL 10.45 will fix the problem with storing off-screen iconized
positions at program exit.

Wayne


> -----Original Message-----
> From: writelog-bounces at contesting.com
> [mailto:writelog-bounces at contesting.com]On Behalf Of W7OM at aol.com
> Sent: Saturday, January 10, 2004 03:47
> To: writelog at contesting.com
> Subject: [WriteLog] NAQP multiplier list
> 
> 
> Getting ready for the NAQP, everything went well until I tried 
> bringing up 
> the MULTIPLIER window.  It shows on the bottom task bar, but no 
> window.  Where 
> did it go?  Or am I missing a file or ??
> 
> 73
> 
> Rod
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/