[WriteLog] RTTY Questions

[WW3S]

And thats probably the problem...the rig is being keyed via command from the
radio control portion rather than being keyed by the rigblaster which will
invoke PTT thru the mic cable...

----- Original Message ----- 
From: "Tony Osman" <tony.osman at sympatico.ca>
To: <writelog at contesting.com>
Sent: Sunday, January 25, 2004 11:24 AM
Subject: Re: [WriteLog] RTTY Questions


> John,
>
> I believe that the rig is being keyed for Bob by his having the LPT set
for
> PTT.
>
> Tony, VE3RZ
>
> ----- Original Message ----- 
> From: "WA9ALS - John" <ham_reflectors at wa9als.com>
> To: "Bob Naumann - N5NJ" <n5nj at gte.net>; <writelog at contesting.com>
> Sent: Sunday, January 25, 2004 11:09 AM
> Subject: Re: [WriteLog] RTTY Questions
>
>
> > > I started rttyrite, and set the port for com4.  This is the problem.
> This
> > does not make rttyrite do ptt on Com4.  What I had to do, is leave the
> > settings for LPT1 alone, and add that Com4 is a CW port in my Writelog
> port
> > setup, and contrary to my logic, have no port selected in Rttyrite.
> >
> > This has to be a Rigblaster issue.  I use COM2 for FSK and PTT, and COM2
> is
> > set in the Rttyrite window.  If I chose "None" in the Rttyrite window,
my
> > rig is not keyed, as expected.  My Ports Setup only has settings enabled
> for
> > rig control (freq/band/QSY).
> >
> > I don't understand how you get rig keying without selecting a com port
in
> > the Rttyrite window - unless you are doing that via rig control by
> > indicating so in the Port-Setup screen.  - John
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>