[WriteLog] RTTY Questions

[Bob Naumann - N5NJ]

That's right.

The rig was being keyed by my LPT port setup (which bypasses the rigblaster=
 direct to the rig), and the Rigblaster was not being keyed by the RS-232 p=
ort, despite having it selected in rttyrite.

I am going to build up an FSK interface and get that working.

Thanks!

-Bob

  =


> ------------Original Message------------
> From: "Tony Osman" <tony.osman at sympatico.ca>
> To: <writelog at contesting.com>
> Date: Sun, Jan-25-2004 10:24 AM
> Subject: Re: [WriteLog] RTTY Questions
> =

> John,
> =

> I believe that the rig is being keyed for Bob by his having the LPT set f=
or
> PTT.
> =

> Tony, VE3RZ
> =

> ----- Original Message ----- =

> From: "WA9ALS - John" <ham_reflectors at wa9als.com>
> To: "Bob Naumann - N5NJ" <n5nj at gte.net>; <writelog at contesting.com>
> Sent: Sunday, January 25, 2004 11:09 AM
> Subject: Re: [WriteLog] RTTY Questions
> =

> =

> > > I started rttyrite, and set the port for com4.  This is the problem.
> This
> > does not make rttyrite do ptt on Com4.  What I had to do, is leave the
> > settings for LPT1 alone, and add that Com4 is a CW port in my Writelog
> port
> > setup, and contrary to my logic, have no port selected in Rttyrite.
> >
> > This has to be a Rigblaster issue.  I use COM2 for FSK and PTT, and COM=
2
> is
> > set in the Rttyrite window.  If I chose "None" in the Rttyrite window, =
my
> > rig is not keyed, as expected.  My Ports Setup only has settings enable=
d
> for
> > rig control (freq/band/QSY).
> >
> > I don't understand how you get rig keying without selecting a com port =
in
> > the Rttyrite window - unless you are doing that via rig control by
> > indicating so in the Port-Setup screen.  - John
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> =

> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> =