[WriteLog] Function keys

[DJ3IW Goetz]

Very simple!
When doing S + P he hits F5 and then having received a QSL(!) 
for the outgoing exchange CTRL-Enter! This what I always do 
when in S+P (using F7 instead of his F5).
73 de Goetz
dj3iw at t-online.de
----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: <WriteLog at contesting.com>
Sent: Saturday, January 31, 2004 5:27 AM
Subject: Re: [WriteLog] Function keys


> On Wed, 28 Jan 2004 16:36:41 -1000, S. Sneidar wrote:
> 
> >F1        CQ - Run mode
> >F2        Response and report -  Run mode
> >F3        QSL/QRZ -  Run mode
> >F4.       Call someone -   search and pounce mode
> >F5        Response and report -  search and pounce mode
> >F6        Your call again?
> >F7        Your report again?
> >F8        My call repeated several times
> >F9        My report repeated several times
> >F10      Worked B4
> 
> Something that has always bothered me about this setup is, How do you
> operate Search and Pounce with F3 programmed for QSL/QRZ?  To save a
> QSO, you have to hit <ENTER>, and when you do, WL sends  the QSL/QRZ
> message. But when you're running S&P, you don't want to send anything
> at that point, and if you do, you drive the other guy nuts!  I've
> solved this by leaving <F3> blank and using a different memory for
> QSL/QRZ. 
> 
> Jim K9YC
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>