[WriteLog] Interfacing to TS-2000

[Rick Stoneking]

All,

I have a buddy who is trying to interface his TS-2000 to use WL voice 
keying for FD.  I took a quick look at the manual and it looks like it 
should be possible to use the ACC2 connector on the back for all required 
signals.  Audio out from  the main VFO is on Pin3, Audio in from the PC 
sound card on Pin11, and PTT from COM/LPT port on Pin9, and of cours GND.

Is this correct?  Can the PTT control come from either the COM port or LPT 
port (or will only one of them work)?

Thanks,
Rick
W2RDS