[WriteLog] Sloppy keying[Scanned]

[Nick Kail]

I use the Microham USB keyer and it has cured the sloppy keying I had on my
setup
Plus I know that Microham are working towards a software solution to be able
to "split" the usb port into seperate com ports which will allow you to have
a different port number for your CAT and CW outputs
Hope this helps

Nick
G3VCP/ M0MLR/2E0MLR/M3MLR  (and soon running out of space for callsigns hi)
----- Original Message ----- 
From: "Robin Thompson" <robin at g3tkf.freeserve.co.uk>
To: <writeLog at contesting.com>
Sent: Tuesday, June 22, 2004 9:01 AM
Subject: Re: [WriteLog] Sloppy keying


> In message <00fc01c457f3$8cc35ee0$c85c1418 at attbi.com>, Dave W7DPW
> <w7dpw at comcast.net> writes
> >Check your [PORTS] section in writelog.ini and you need the following
> >:
> >The addition is:
> >
> >Find the [PORTS] section.
> >Add this line:
> >
> >CW_ON_PIN1=1
> Over the last year or so I've done all the suggested changes including
> the above, they made not the slightest difference !
> Compaq Presario/XP/FT1K ....
> Occasional slurred keying ...NOT RF related ... seems down to what else
> the processor is doing at the time .
> Creating a separate partition with W2K and just WL 10.47 (getting
> desperate now), it still occasionally does it  - although less.
>
> The only solution working for me seems to be forget parallel keying -
> serial keying with a pcmcia card works, and I've just ordered a microHam
> USB unit that MAY cure it.
> G3TKF
> Robin Thompson
> City of Bath
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/