[WriteLog] Selecting MkV 500/250 filters in AFSK/RTTY modes
Bryan Preas
preas at parc.com
Mon Mar 1 11:06:42 EST 2004
The MkV is brain damaged with respect to AFSK/RTTY filter selection.
You can change filters manually by
disengage the radio from the serial port by using Setup | Ports menu, then
clear the check in the Rig column, click OK
use MPFilters, http://www.qsl.net/va3cr/main/mpfilters.htm, to select the
filters you want
reconnect the radio to the serial port by Setup | Ports menu: check the
port in the Rig column, select the Rig Type, and set the CommPTT
drop down entry (Writelog doesn't remember of this when you clear
the check in the Rig column). Click OK.
I have automated the process by using Macro Express
(http://www.macroexpress.com/, $40).
Other keyboard/mouse macro packages should work just as well.
I have defined a macro to perform the above steps automatically. I press
Ctl-F to invoke the
macro. It disconnects the rig from the serial port and invokes MPFilters.
I select the
filters I want and right click to dismiss MPFilters. The macro continues
by reconnecting
the rig to the right COMM port, reselecting the rig type and the correct
COMM PTT entry.
I can change filters in about 5 seconds. Not as good as using a front
panel button, but
better than suffering with the wrong filter selection.
I would offer my macro source code to you guys but it is not portable. I
have used screen
dimensions (within the popup windows) so the macro only works for my screen
resolution.
BTW, I also defined MacroExpress macros for some of the WL setup chores:
Register to accept network
connections, Link to network, RTTY Single Tx Lockout, Log which radio makes
the QSO,
Setting the Timed CQ key and interval.
These macros (and command scripts) have allowed me to reduce my contest
startup time to a
minimum.
Bryan
AC6JT
preas at parc.com
More information about the WriteLog
mailing list